Diamond Northern

Cordless Cutting Edge Saw™ BNCE-20 18V

admin — Fri, 04 Feb 2011 22:55:22 +0000

The BNC-20V from Benner Nawman is a small lightweight hand-held tool with enough cutting power to to cut through:

Rebar
All-thread rod
Coil rod
EMT conduit
Burglar bars
Much, much more!

It has a 3-position removable side handle and a rotating trigger handle to make it easier getting in those awkward positions that seem to come every day.

The unique design keeps the cutting blade almost completely out of harms way, and comes with a chip collector bag to keep you from accidentally picking up a hot piece of metal. The blade design leaves the cut burr free, so you can cut and go without any grinding.

The BNCE-20 Cutting Edge Saw is warranted by Benner Nawman to be free of defects from workmanship and materials for the period of one year from the date of original purchase.

BLADE SIZE	4.375″ (110 mm)
BLADE TYPE (2 ea.)	Tungsten Carbide
TEETH ON BLADE	24
NO LOAD RPM	2,000
DEPTH OF CUT	.860″ (21.8 mm)
NET TOOL WEIGHT **	7.6 lbs. (3.5 kg)

The BNCE-20 Cutting Edge Saw™

admin — Fri, 04 Feb 2011 22:36:57 +0000

This compact and lightweight tool has a 3-position removable side handle and a rotating trigger handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas.

This amazing tool can cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, burglar bars and more. It is designed to cleanly cut the material FLUSH with the surface.

VOLTAGE	120
HERTZ	60
AMPS	9
WATTS	1100
BLADE SIZE	4.375″ (110 mm)
BLADE TYPE (2 ea.)	Tungsten Carbide Tipped
BLADE NUMBER OF TEETH	24
BLADE KERF	1.6 mm
NO LOAD RPM	2,000
DEPTH OF CUT	.860″ (21.8 mm)
CONSTRUCTION TYPE	DOUBLE INSULATED
CORD TYPE	18 AWG, 2 CORD
PLUG TYPE	U.S. POLARIZED 2-PRONG
CORD LENGTH	10 ft. (3 m)
TOOL LENGTH	20.3″ (515 mm)
TOOL WIDTH *	5.5″ (140 mm)
TOOL HEIGHT *	3.9″ (99 mm)
NET TOOL WEIGHT **	7.6 lbs. (3.5 kg)

BNR6402A Hand Held Paddle Mixer

admin — Fri, 04 Feb 2011 22:25:28 +0000

2-speed power mixer with double shaft mixing paddles
High performance with 2 paddles working clockwise and counter clockwise respectively with quick change chucks
Robust gearbox with a powerful high torque motor
Ergonomically designed handle with soft grip
Soft start function and constant speed control
Mixing paddle connection: 1/2″ Hex Shank

BNR6402A Hand Held Paddle Mixer Details

Power	1400W / 11.7 Amps / 1.9 Hp
Voltage	120V/60Hz
Number of Gears	2
No Load Speed I	180 – 460 rpm
No Load Speed II	300 – 700 rpm
Motor protective type / class	Double Insulated / II
Mixing Paddle ( ø Max.)	4-3/4″ (120mm)
Shipping Weight	19 lbs (8.5 Kg)

BNR6208B Hand Held Paddle Mixer

admin — Fri, 04 Feb 2011 22:24:00 +0000

Ergonomically designed handle with a soft grip feature
2-speed power mixer with a soft start feature
Variable speed with a constant speed control setting
Safety on/off switch with lock-on button for continuous operation
Heavy-duty gearbox with a powerful high torque motor

BNR6208B Hand Held Paddle Mixer Details

Power	1300W / 11 Amps/ 1.7 Hp
Voltage	120V/60Hz
Number of Gears	2
No Load Speed I	180 – 460 rpm
No Load Speed II	300 – 700 rpm
Standard Mixing Paddle Connection	M14 x 2
Motor protective type / class	Double Insulated / II
Mixing Paddle ( ø Max.)	5-1/2″ (140mm)
Shipping Weight	16.5 lbs (7.5 Kg)

BNR6169 Hand Held Paddle Mixer

admin — Fri, 04 Feb 2011 22:17:04 +0000

Forward / reverse switch
Variable speed trigger with a lock-on button for continuous operation
Standard M14 paddle connection or 1/2″ shank capacity for any mixing paddles
Rear D-handle rotates 360°
3-position removable side handle
Mixing Capacity 2 bags – 20 Gallons
Up to 80 lbs. of liquid material

BNR6169 Hand Held Paddle Mixer Details

Power	1050W / 9 amps / 1.4 Hp
Voltage	120V/60Hz
Number of Gears	1
No Load Speed	0-550 rpm
Drill Capacity	1/2″ (13mm)
Motor protective type / class	Double Insulated / II
Mixing Paddle ( ø Max.)	4-3/4″ (120mm)
Shipping Weight	13.25 lbs (6 Kg)

Rebar Wire

admin — Fri, 04 Feb 2011 18:04:04 +0000

Galvanized 18 gauge/double tie 40 spools per carton.

This is not the plastic coated type.

BNT-64 REBAR TYING TOOL

admin — Fri, 24 Dec 2010 00:43:23 +0000

The BNT-64 Rebar Tying Tool is built to reduce tying time needed for securing reinforcing rods together while doing concrete form work. It’s great for repetitious tying work and reduces the risk of carpal-tunnel and back injuries.

The one-handed operation allows your other hand to hold rebar in place. This tool will securely tie up to #10 (32mm) x #10 (32mm) rebars and all sizes in between. It uses a strong double tie wrap of 18 gauge galvanized wire. The BNT-64 makes consistent ties, no wire waste, in only 1.6 seconds per tie. The handle can be used either as a pistol configuration or as a rifle style to reduce bending while tying horizontal floor mats. The tool carries a one year limited warranty. The tier is powered by a rechargeable 12 Volt Ni-Cd Battery (two are included with the purchase along with a charger unit).

The standard wire guide (#32) ties up to two #6 (3/4″) rebar. Optional wire guides are available (#26 wire guide ties maximum #3 x #4 rebars; #51 wire guide ties maximum #8 x #8 rebars; #64 wire guide ties maximum #10 x #10 rebars.) The tool uses 18 gauge galvanized or plastic coated wire on a spool (148 feet) that produce 120-200 ties.

Benner-Nawman also carries replacement spooled wire as a consumable item (40 spools in a protected carton).

Maximum Rebar Tying Capacity	#10 (32mm) x #10 (32mm) with the #64 wire guide installed
Tool Weight Shipping Weight	8.4 lbs (3.8 kg) w/ battery & wire spool /w/ standard equipment 27 lbs (12.25 kg)
Tool Dimensions H x W x L (mm)	7.02” x 3.12” x 25.74” for horizontal work (180 x 80 x 660) 11.31” x 3.12” x 22.62” for vertical work (290 x 80 x 580)
Number of Parts	Only 75
Tying Speed	1.6 seconds per tie
Tie Wraps/Wire Size	(2) tie wraps of 18 gauge or 1.0 mm
Wire Spool Length/ Wire Types	(148 ft) 45 m per spool / Galvanized Wire only
Ties Per Coil	120 to 200
Wire Carton/ Shipping Weight	40 wire spools per carton / 29 lbs. (13 kg) per carton
Ties Per Battery Charge	750 ties per battery charge (4-5 wire spools)
Torque Adjustment	0-9 (increases wire tie tightness)
Standard Wire Guide Installed	#32 wire guide ties maximum #6 x #6 rebars
Optional Wire Guides Using the right size wire guide increases wire usage, tying speed & decreases clearance.	#26 wire guide ties maximum #3 x #4 rebars #51 wire guide ties maximum #8 x #8 rebars #64 wire guide ties maximum #10 x #10
Battery Type (#BN-12VCad)	Rechargeable Ni-Cd (nickel-cadmium)
Battery Voltage/ Recharging Time	DC 12 Volt / Approx. 30 minutes
Battery Charger (#BN-12VChgr)	110-240 VAC, 50/60Hz
Operating Humidity	90% or under
Operating Temperature	0 to 50 degrees C (32 to 122 degrees F)
Warranty Period	One Year Limited

DBD-25H Rebar Bender

admin — Fri, 24 Dec 2010 00:40:24 +0000

This heavy-duty portable bender helps to save valuable man-hours by effortlessly bending rebar up to #8 (1″) Grade 60 at job sites or in your shop. This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend. The lever-type angle selector can be set to accurately bend any angle from 0-180 degrees. Bends (4) each #3 rebar, (3) each #4, (2) each #5 or #6 rebar and (1) #7 or #8 rebar at one time. The roller chart makes it easy to select the correct combination of rollers to achieve an inside bending diameter of six times the rebar diameter. An emergency stop switch and two lifting handles are standard features. The DBD-25H portable rebar bender comes complete with (9) bending rollers in two steel carrying cases, a tool kit, a bender cover, and a standard foot pedal control switch for hands-free bending. Optional circular pattern bending rollers are available. Benner-Nawman backs it with a one-year warranty.

Maximum Bending Diameter	#8 (1″) (25mm) Grade 60
Bending Angle	0 – 180 degrees
Bending Speed	9 Seconds for 180 degree bend
Power Supply	115V 50/60Hz -15 amps
Weight	210 lbs. (95 kg)

DBD-32X Rebar Bender

admin — Fri, 24 Dec 2010 00:38:57 +0000

The DBD-32X is a heavy-duty portable table-type bender. This unit is the largest 115 volt portable rebar bender available. This powerful electrically driven mechanical unit will easily bend 1-1/8” Grade 60 rebar 180 degrees in only 8 seconds. This fast and accurate bender is a valuable tool for small to medium size production shops. It comes standard with a hands-free foot pedal control switch and a complete bending radius roller set. This unit is available separately or in combination with a cutter mounted on a skid, stand or trailer unit. An optional stand is also available.

Maximum Bending Diameter	1-1/8” (#9) Rebar (29mm) Grade 60
Bending Angle / Speed	Up to 180 degrees / 8 seconds
Voltage/Amperage	115V 50/60Hz / 12 amps
Tool Weight	397 lbs (180 kg)
Dimensions L x W x H	23” (590mm) x 24.2” (620mm) x 18.7” (480mm)

DBD-25X Rebar Bender

admin — Fri, 24 Dec 2010 00:37:42 +0000

The DBD-25X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #7 (7/8”) grade 60 at the job site or in your shop. This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend. The lever-type angle selector can be set to accurately bend any angle from 0-180 degrees. An emergency stop switch and two lifting handles are standard features. The DBD-25X portable rebar bender comes complete with a set of (6) bending rollers in a steel carrying case, a tool kit, a bender cover, and a standard foot pedal control switch for hands-free bending. Optional stands, circular pattern rollers, and a highway trailer unit are available.

Maximum Bending Diameter	7/8” (#7) Rebar (22mm) Grade 60
Bending Angle / Speed	Up to 180 degrees / 6 seconds
Voltage/Amperage	115V 50/60Hz / 12 amps
Tool Weight	190 lbs (86 kg)
Dimensions L x W x H	19” (490mm) x 21.5” (550mm) x 17.2” (440mm)